Dan Foster
Workpage 5-19
Correct neck angle, dress frets,may play with decent action

Angle is too high, dowel must drop in angle
Dowel has to come out for repair
Dowel removed with heat, no breakage
Glue release from heat and from age, all must be sealed
First, the heel cap
Working in the glue so it wicks into all of the heel laminates
Glue has penetrated, now time for a clamp off
Pulled back together and curing
Cap on, angle changed, curing
Dressing frets, you can see where its hitting
Cleaning/Lubing tuners, snugging screws
Oiling board, and allowing glue to fully cure
Cleaned head and wooled the hardware
This shows the drop in action height, no tension yet.
MORE TO FOLLOW