Bacon bridge, orig in case

Starting the neck elevation, cutting the skirt back

Chiseling out wood

Not perfect, but much better

Time to cut heel cap back for neck elevation.

Pushed up, and shimmed on underside

First disassembly since new.

Dremel with cutoff wheel

filing the edges

Fret work

It will not rise properly if you do not.

Hardware installed

Set-up time.

Now to remove the wood. All the way to bottom of tone ring

Head cleaning process

Stew-Mac 147 wire

That is complete, ready for install.

Elevation shown.

Good action and string clearance.